background image

B-320-2-E

3

9.3 Meter Body Disassembly and Inspection ....................................................................................32

9.3.1 Single-case Construction Meter Body Disassembly and Inspection .....................................32
9.3.2 Single-case Construction Meter Body Assembly Procedure .................................................33
9.3.3 Double-case Construction Meter Body Disassembly and Inspection ...................................34
9.3.4 Double-case Construction Meter Body Assembly Procedure ...............................................35

10. ABOUT THE BATTERY PACK .......................................................................................................36

10.1 Battery Life .................................................................................................................................36
10.2 Battery Pack Replacement ........................................................................................................36

11. TROUBLESHOOTING ....................................................................................................................37

12. EXPLODED VIEWS AND PARTS LIST ..........................................................................................40

12.1 Size 29 Single Case Construction Meter Exploded View and Parts List ...................................40

12.1.1 Size 29 Single Case Construction Meter Exploded View ....................................................40
12.1.2 Size 29 Single Case Construction Meter Parts List .............................................................4

12.2 Size 60 Single Construction Meter Exploded View and Parts List.............................................42

12.2.1 Size 60 Single Construction Meter Exploded View ..............................................................42
12.2.2 Size 60 Single Case Construction Meter Parts List .............................................................43

12.3 Size 31 Single Case Construction Meter Exploded View and Parts List ...................................44

12.3.1 Size 31 Single Case Construction Meter Exploded View ....................................................44
12.3.2 Size 31 Single Case Construction Meter Parts List .............................................................45

2.4 Sizes 28, 29, and 31 Double Case Construction Meter, 10K type Exploded View and Parts List ..............46

12.4.1 Sizes 28, 29, and 31 Double Case Construction Meter, 10K type Exploded View ..............46
12.4.2 Sizes 28, 29, and 31 Double Case Construction Meter, 10K Type Parts List ......................47

12.5 Size 60 Double Case Construction Meter, 10K type Exploded View and Parts List ..................48

12.5.1 Size 60 Double Case Construction Meter, 10K type Exploded View ...................................48
12.5.2 Size 60 Double Case Construction Meter, 10K Type Parts List ...........................................49

12.6 Sizes 28, 29, and 31 Double Case Construction Meter, 30K type (F3) Exploded View and Parts List ................ 50

12.6.1 Sizes 28, 29, and 31 Double Case Construction Meter, 30K type (F3) Exploded View .......50
12.6.2 Sizes 28, 29, and 31 Double Case Construction Meter, 30K Type (F3) Parts List ...............5

2.7 Size 60 Double Case Construction Meter, 30K type (F3) Exploded View and Parts List ................ 52

12.7.1 Size 60 Double Case Construction Meter, 30K type (F3) Exploded View ............................52
12.7.2 Size 60 Double Case Construction Meter, 30K Type (F3) Parts List ....................................53

12.8 Register Exploded View and Parts List ......................................................................................54

13. GENERAL SPECIFICATIONS ........................................................................................................55

"NOTE", "CAUTION" and "WARNING" in this manual are to promote awareness of users and each 
word has meaning as follows.

 

NOTE:  Notes  are  separated  from  the  general  text  to  bring  the  user's  attention  to 

important information.

 

CAUTION:  Caution  statements  signal  the  user  about  hazards  or  unsafe  practices 

which could result in minor personal injury or product or property damage.

 

WARNING:  Warning  statements  signal  the  user  about  hazards  or  unsafe  practices 

which could result in severe personal injury or death.

Содержание Ultra Oval LW76E

























































Отзывы: