User Manual of Network Fisheye Camera
38
2.
Check the corresponding version checkbox (
,
,
) to enable the feature.
3.
Configure the SNMP settings.
Note:
The settings of the SNMP software should be the same as the settings you
configure here.
4.
Click
Save
to save and finish the settings.
Note
:
A reboot is required for the settings to take effect.
5.3.6
Configuring 802.1X Settings
Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the
feature is enabled, the camera data is secured and user authentication is needed
when connecting the camera to the network protected by the IEEE 802.1X.
Note:
802.1X settings vary according to the camera model.
Before you start:
The authentication server must be configured. Please apply and register a user name
and password for 802.1X in the server.
Steps:
1.
Enter the 802.1X Settings interface:
Configuration >
Advanced Configuration >
Network > 802.1X
Figure 5-15
802.1X Settings
2.
Check the
Enable IEEE 802.1X
checkbox to enable the feature.
Содержание C-OVE-6DVIR-FE
Страница 1: ...Network Fisheye Camera User Manual...
