E
ng
lis
h
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
Electrical energy can perform many useful functions. This
unit has been engineered and manufactured to ensure
your personal safety. But IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.
In order not to defeat the safeguards incorporated into this
product, observe the following basic rules for its installation,
use and service. Please read these “Important Safeguards”
carefully before use.
Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accord-
ance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including am-
plifiers) that produce heat.
9. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the
manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with
the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT ATTEMPT TO OPEN ANY PART OF THE UNIT. NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE,
DRIPPING OR SPLASHING LIQUIDS. OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED
ON THIS APPARATUS.
THE UNIT MUST BE INSTALLED IN RACK CABINETS ONLY:
PLUG THE AMPLIFIER’S MAINS CONNECTIONS VIA A
SECTIONING BREAKER TO A POWER DISTRIBUTION
PANEL INSIDE THE RACK CABINET.
THE SECTIONING BREAKER MUST REMAIN READILY
ACCESSIBLE.
WHEN THE UNIT IS INSTALLED IN A RACK CABINET, MAKE
SURE THAT IT HAS SUFFICIENT SPACE ON ALL SIDES TO
ALLOW FOR PROPER VENTILATION (50 CM FROM THE
FRONT AND REAR VENTILATION OPENINGS).
CONNECTION TO THE MAINS SHALL BE DONE ONLY BY A
ELECTROTECHNICAL SKILLED PERSON ACCORDING THE
NATIONAL REQUIREMENTS OF THE COUNTRIES WHERE
THE UNIT IS SOLD.
WARNING:
FUSE ON NEUTRAL
CLASS3
WIRING
CLASS3
WIRING
CLASS3
WIRING
CLASS3
WIRING
CLASS3
WIRING
CLASS3
WIRING
CLASS3
WIRING
EXPLANATIONS OF GRAPHICAL SYMBOLS
CLASS3
WIRING
The triangle with the lightning bolt is used to alert the
user to the risk of electric shock.
CLASS3
WIRING
The triangle with the exclamation point is used to
alert the user to important operating or maintenance
instructions.
The CE-mark indicates the compliance with the low
voltage and electromagnetic compatibility.
Symbol for earth/ground connection.
Symbol indicating that the equipment is for indoor
use only.
Symbol for conformity with Directive 2002/96/EC and
Directive 2003/108/EC of the European Parliament
on waste electrical and electronic equipment (WEEE).
Do not use the unit at altitudes above 2000 m.
Do not use the unit in tropical environment.
Important safety instructions
1
OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
[email protected]
www.outline.it
12
