3.
Installation
3.1
Choose the outdoor location
3G/4G Signal reception
Using your mobile phone, walk around and look for a location that
gets a good signal. The suggested signal strength is at least 3 bars
(-90dBm).
If you have a weak signal reception, please upgrade the mobile
aerial with higher gain and directional logarithm aerial.
Distance to PoE injector
A 10-meter LAN cable is included. Make sure outdoor router is
no more than 10 meters away from the indoor PoE injector.
The 15V 1A PoE injector supports maximum 10-meter LAN cable.
If you want to extend to up to 50~100 meters, please contact us to
upgrade the PoE injector to 24V~48V.
Directional Wi-Fi coverage
The default Wi-Fi antenna transmit Wi-Fi signals to all the directions,
if you want to send the Wi-Fi signal to a defined area, and send the
Wi-Fi signal to a further distance, please upgrade the Wi-Fi aerial to
higher gain and directional logarithm aerial.
Wi-Fi AP mode
In the Wi-Fi AP mode, outdoor router could replay and boost the
Wi-Fi signal received from another router or access point (AP).
Make sure in the location of outdoor router could receive at least
2 bars of the Wi-Fi signals.
Mobile tower
Outdoor
router
Wi-Fi
signal
LAN cable to
PoE injector
3G/4G Router
Outdoor
router
Receive
Wi-Fi signal
Boost Wi-Fi
signal
LAN cable to
PoE injector
Wi-Fi Relay
Outdoor
router
Improve 3G/4G
signal reception
Send Wi-Fi signal to
further distance
Upgrade Aerials
2.3
Indicator description
PoE power
Router power
Mobile signal
Wi-Fi signal
Wi-Fi amplifier
Indicator Status Description
Red
Off
Red
Off
Blue
Blue flash slowly
Blue flash quickly
Off
Green
Green flashing
Off
Blue flashing
Off
System is up and ready
No input PoE power
PoE module and Wi-Fi module are turn on
Router is power off
Received 3G/4G signal, but cannot connect due to no SIM card or no money in SIM card.
Received 3G/4G signal, but no data transmission.
Received 3G/4G signal, transmitting data via the mobile network.
The 3G/4G signal has not been acquired.
Wi-Fi hotspot is working, no user connection.
Wi-Fi hotspot is working, and the user has connected.
Wi-Fi function has been closed.
Wi-Fi amplifier is working with 30dBm output power.
Wi-Fi function is off, or Wi-Fi output power is 17dBm or 20dBm.
