14.
Locate
Interior
Joist Holders (6)
found
in hardware kit. Measure
18” on center on both
Front and Rear Girder
and attach Joist Holders
with 1 1/4” screws.
Place 67” long Interior
Joists in Holders and
attach with 1 1/4” screws.
12.
Locate
Upper Rear Girder
(Pre-Drilled and with a 3/8” Cleat on inside ends). Attach to Support
Posts with 4 Lag Bolts. Make sure Girder is flush with top and sides of Posts with Cleat to the inside.
13.
Locate
Upper Side Girder
(70” long and Pre-Drilled) and attach with Lag Bolts to Support
Posts as per
Step 12.
Complete all Upper Girders as Per
Steps 12 & 13
.
Front
Cleat
Side
Girder
Front
75”
18”
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 7
