12.
On a flat surface, position
Blocking (F)
where marked on Main Joist (D) and screw with
2 - 3” screws per piece. Blocking should be
flush with top and bottom of Main Joist with all
notches facing down.
F
D
D
Main Joist is pre-marked
for blocking placement.
2 - 3”
screws
per piece.
Completed Ladder Section
13.
Carefully lift up completed
Ladder Sections and place between
H-Side Girders. You will require a
helper to assist in lifting up the
ladder section.
Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 7
14.
Lower and position Ladder on
H-Side Girders evenly between Posts
so notch of joist sits on H - Girder.
15.
Attach Ladder to H-Side Girders with
4 - 4” screws per Ladder. Screw from top
down into girder.
