2.
Lift up a completed
Post/Girder section slowly
and carefully. Make sure Side
Girder is facing outward.
3.
Position bottom of Post in existing
Post Mounts.
4.
Secure Post to Post Hardware.
Post
Mounts
Lag Screws
5.
Locate
Girder (E)
and lift into
position between both
B-Girder / Post Assemblies. The
E-Girder has a deep notch facing
down on each end and is 138” long.
Lift, position and attach the
second Post / Girder section to
Post Hardware.
B-Girder
facing out.
Deep Notch facing down.
Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 4
E
Front
