Power Control Board
Access/Replacement
Smoke Element
Access/Replacement
Removal:
1. Make sure your smoker is OFF and is unplugged
2. Remove all cooking grids and water pan from smoker
3. Remove wood chip tray tent, wood chip tray and grease tray
4. Remove (3) screws from smoke element bracket from inside
smoker -
(Figure C1)
5. Lay the smoker on its side as shown -
(Figure C2)
6. Remove bottom panel - (16 screws)
7. Remove wires from Smoke Element -
(Figure C3)
8. Remove smoke element from inside smoker
Installation:
9. Place the new smoke element into smoker and secure with
(3) screws previously removed.
10. Push wires back onto the tabs of new smoke element from
the back of smoker
11. Reattach bottom panel onto smoker with same 16 screws
previously removed
12. Lift smoker back to its upright position
13. Place water pan and cooking grids back into your smoker.
14. Place wood chip tray tent, wood chip tray and grease tray
back into smoker
15. Plug smoker back into an electrical outlet
Removal:
1. Make sure your smoker is OFF and is unplugged
2. Remove all cooking grids and water pan from smoker
3. Remove wood chip tray tent, wood chip tray and grease tray
4. Lay the smoker on its side as shown -
(Figure C2)
5. Remove bottom panel - (16 screws)
6. Remove wires from Power Control Board -
(Figure C3)
7. Remove Power Control Board - (2 screws) -
(Figure C3)
Installation:
8. Place the new power control board in smoker.
9. Secure new power control board to grease tray rail with same
(2) screws previously removed.
10. Connect all wires back onto power control board
11. Assemble bottom panel onto smoker with same 16 screws
previously removed
12. Turn smoker back to its upright position
13. Place water pan and cooking grids back into your smoker.
14. Place wood chip tray tent, wood chip tray and grease tray
back into smoker
15. Plug smoker back into an electrical outlet
Part Replacement Guide
Smoke Element
(3 screws)
Smoke Element
Wires
Power Control
Board
Bottom Panel
(16 screws)
Figure C1
Figure C2
Figure C3
screw
screws
screws
Tools Needed:
Phillips Screwdriver
22