8
Igniter Installation
Sparker will not operate correctly without an ignition
and
ground wire
attached.
Plug both
BLACK
wires hanging from the burner into the back of
the sparker box.
Test system by pushing the button on the igniter. Consult the
troubleshooting section of the Crystal Fire Owner’s Manual, if
the spark is weak, intermittent, or not present.
1.
Make sure the valve is in the OFF
position before beginning.
2.
Install sparker as shown, using a
AAA battery (not included).
Negative end should be placed
inside the CF-SPARKER, positive
end outside of the CF-SPARKER.
OFF
