Outdoor GreatRoom Company CR-1242-B-K, Руководство по установке

Страница: 5 / 6

8
Igniter Installation
1.
Make sure the valve is in the OFF
position before beginning.
2.
Install sparker as shown, using an
AAA battery (not included) with
positive (+) end out.
After installing igniter and making gas connections, verify that
they are tight and that no leaks are present using a solution of
soapy water or a commercially available leak-check solution.
Sparker will not operate correctly without an ignition and ground
wire attached.
•
Plug both BLACK wires hanging from the burner into
the back of the sparker box. If an orange wire is
present, do not use it. Orange wire is for automatic
ignition system add-on only.
•
Test system by pushing the button on the igniter.
Consult the troubleshooting section if spark is weak,
intermittent, or not present.
5
Assembly Instructions
1. Open packaging make sure all items are
included. Remove items from packaging.
2. Set the base in the desired location and set top onto
base.