10 |
P a g e
Igniter Installation (Part 2)
IMPORTANT
Please consult your Crystal Fire instruction manual for detailed instructions and
important information related to hooking up your burner, including safety
information, proper tightening of connections with two wrenches and full burner
setup and lighting instructions.
DO NOT ATTEMPT TO INSTALL BURNER WITHOUT FIRST CONSULTING THE MANUAL.
IF YOU ARE UNSURE OF HOW TO COMPLETE THE STEPS OUTLINED, CONSULT A
QUALIFIED TECHNICIAN
3.
To properly install ignition system, an Ignition and Ground
wire need to be attached to the igniter box.
Start by plugging the black Ignition wire hanging from
the burner in to one side of the back of the igniter
(either side is fine).
Next; plug the Ground wire into the open port on the
igniter box.
Test system by depressing the button on the igniter. A
continuous repeating spark at the igniter on the burner
means everything is connected properly. Consult the
troubleshooting section of your crystal fire owner’s
manual if spark is weak, intermittent, or not present.
4.
Once the system is grounded and igniter
operation is verified, gas hookups can be
performed by a qualified gas installer.
