6 |
P a g e
Before completing the following steps, read and
understand the Crystal Fire owner’s manual.
Gas Connection
Connect the incoming black rubber gas hose (for
propane) or incoming natural gas line to the valve.
It is not recommended to use Teflon tape or pipe
dope on the connection to the valve with flare
fittings.
LP installations use the hose and regulator
provided with the burner.
Natural Gas installations refer to the supplied
Crystal Fire Manual.
Attach incoming gas here (black
rubber propane hose or incoming
natural gas line)
Use two wrenches to fully tighten gas connections.
Do not make gas connections to burner until concrete top is
installed. Gas connections can be made from below or from
above by lifting burner to access gas line.
TIGHTEN ALL FITTINGS WITH TWO WRENCHES AND CHECK FOR
LEAKS BEFORE OPERATION