Page | 10
www.outdoorrooms.com
BCH-1242 42477 REV A
D. Leak Check and Line Purge
Once the gas piping system is in place, all fittings and
connections need to be checked for leaks.
Use a commercially available, non-corrosive leak-
check solution.
Once leak test is complete, be sure to rinse off all
remaining leak-check solution from the gas piping
system.
WARNING: CHECK FOR GAS LEAKS
FIRE RISK
EXPLOSION RISK
ASPHYXIATION RISK
Check all fittings and connections.
Do not use an open flame.
Eliminate possible ignition sources such as open
flames and sparks during leak check.
Presence of gas leaks can lead to high levels of
carbon monoxide. If leaks are detected, ensure
proper ventilation is available to expedite the
dissipation of leaked gas.
After leak check has been performed and the gas
supply system is leak-free, a purge of the air in the
supply line should be performed in order to ensure a
safe first ignition of the appliance.
WARNING:
FIRE RISK
EXPLOSION RISK
Gas build-up during purge may ignite.
Purge should be performed by an authorized gas
technician.
Eliminate possible ignition sources such as open
flames and sparks during leak check.
Ensure adequate ventilation.
E. Additional Gas Supply
Information
For LP installations using a non-disposable, self-
contained LP-gas supply system (20 lb. LP tank and the
manufacturer supplied regulator hose):
The LP- gas cylinder used with this appliance
must be constructed and marked in
accordance with the U.S. Department of
Transportation. (D.O.T.)
Specifications for LP-
Gas Cylinders,
or the
Standard for Cylinders,
Spheres and Tubes for Transportation of
Dangerous Goods and Commission,
CAN/CSA-
B339, as applicable.
The LP-gas cylinder must be provided with a
listed overfilling prevention device (OPD).
The LP-gas cylinder must be compatible with
the regulator hose supplied by the
manufacturer with this appliance.
WARNING
Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage. Read the installation,
operating, and maintenance instructions
thoroughly before installing or servicing this
equipment.
WARNING
Installation and repair should be performed
only by a qualified service technician.
