Page 7 of 27
36"
36"
Do not face the griddle directly into the wind.
1. Ensure the LP cylinder valve and all burners are "OFF".
2. Ensure the LP cylinder is connected to the regulator.
3. If the information above is not followed exactly, a fire causeing death or searous injury may occur.
4. Mix a solution of 50% water and 50% liquid dish soap. Do not use any household cleaner solution.
5. Open the LP tank valve by turning the hand wheel counterclockwise ont turn. If you hear a rushing
sound,turn the gas off immediately.In that case,there could be a leak at the connection. Reconnect
the cylinder to the regulator.
6. Spray or brush on the solution covering the following areas:Cylinder welds,regulator and cylidner
connection,gas hose connections to the regulator,all gas hose,all gas hose connections to the
7. Growing bubbles on any of the parts and connections listed aboce indicate a gas leak. Immediately
shut off the LP tank valve by turning the valve clockwise. Retighten the connections or order
replacement parts as needed.Continue to test as necessary until to leaks are derected.
8. Close the LP tank valve by turning the hand wheel clockwise.
burners including the main and side burners.
1. Do not use this griddle in any enclosed
area,garage,shed,or under any type of
overhead structure or canopy.
2. Operate this grill only in a well-
ventilated area.
Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces
and water.
DO NOT USE THIS GRIDDLE if you cannot stop the leaks. Be sure the LP cylinder valve is closed.
If the LP cylinder is still leaking, contact your LP dealer or local fire department.
Do not use nay match or open flame,or smoke,during leak testing.
Do not light a burner during leak testing.
The replacement hose assembly must be the one identified.
