OutBack Power Alino TL Series, Руководство пользователя

Страница: 37 / 48

Operation
900-0248-01-00 Rev A
37
Charger Source Priority Timer
The Alino can switch between Charger Source Priority settings (see 1 6 on page 32) on a timer.
Figure 28 Charger Priority Timer Setting Items
When using multiple sources to support loads, the priority of the source usage ( C S O , S N U , or
O S O ) can be set to change automatically by time of day. For example, during daylight hours
the system can be set to 0 S O . The inverter will charge batteries PV only. Then during night
hours, the system can be set to S N U , which charges from all sources, including utility power.
To set the Charge Source Priority Timers:
1.
Press and hold button
3
for 3 seconds. Screen items
7
,
8
, and
9
will show these options.
C S O
(charge solar)
S N U
(solar and utility)
O S O
(solar only)
2.
The
U S b
,
S U b
, or
S b U
options are set independently for different blocks of time using
buttons
1
,
2
, and
3
. When each button is pressed, the results will appear in this format.
S N U (selection)
0 0
(start time)
2 3 (end time)
3.
To change C S O settings, press button
1
. Once selected, the start and end times can be
set using buttons
4
and
5
. The setting range is from 00 to 23 in increments of one hour.
Press button
6
to confirm the setting.
4.
To change S N U settings, press button
2
. Once selected, the start and end times can be
set using buttons
4
and
5
. The setting range is from 00 to 23 in increments of one hour.
Press button
6
to confirm the setting.
5.
To change O S O settings, press button
3
. Once selected, the start and end times can be
set using buttons
4
and
5
. The setting range is from 00 to 23 in increments of one hour.
Press button
6
to confirm the setting.
2
7
8
9
1
3
4
5
6