OutBack Power Alino TL Series, Руководство пользователя

Страница: 36 / 48

Settings
36
900-0248-01-00 Rev A
Output Source Priority Timer
The Alino can switch between Output Source Priority settings (see 0 1 on page 31) on a timer.
Figure 27 Output Priority Timer Setting Items
When using multiple sources to support loads, the priority of the source usage ( U S b , S U b , or
S b U ) can be set to change automatically by time of day. For example, during daylight hours
the system can be set to S b U . The inverter will run loads from PV or battery power only.
Utility is used only as a last resort. Then during night hours, the system can be set to U S b ,
which runs loads primarily from utility power.
To set the Output Source Priority Timers:
1.
Press and hold button
2
for 3 seconds. Screen items
7
,
8
, and
9
will show these options.
U S b
(utility, solar, battery)
S U b
(solar, utility, battery)
S b U
(solar, battery, utility)
2.
The
U S b
,
S U b
, or
S b U
options are set independently for different blocks of time using
buttons
1
,
2
, and
3
. When each button is pressed, the results will appear in this format.
U S b (selection)
0 0
(start time)
2 3 (end time)
3.
To change U S b settings, press button
1
. Once selected, the start and end times can be
set using buttons
4
and
5
. The setting range is from 00 to 23 in increments of one hour.
Press button
6
to confirm the setting.
4.
To change S U b settings, press button
2
. Once selected, the start and end times can be
set using buttons
4
and
5
. The setting range is from 00 to 23 in increments of one hour.
Press button
6
to confirm the setting.
5.
To change S b U settings, press button
3
. Once selected, the start and end times can be
set using buttons
4
and
5
. The setting range is from 00 to 23 in increments of one hour.
Press button
6
to confirm the setting.
2
7
8
9
1
3
4
5
6