11
COOL mode:
When you select COOL mode, the appliance is cooling the room. Press " + " or " - " to set temperature.
DRY mode:
When you select DRY mode, the appliance is in dehumidifying mode and works at its lowest speed. In this
mode, the fan speed can’t be changed..
FAN mode:
When you select FAN mode, only the fan is operating. There is no heating, nor cooling in this mode.
HEAT mode:
When you select HEAT mode, device is working on heating mode. Press the " + " or " - " button to adjust
temperature.
NOTE:
• In HEAT mode, the device will delay start-up of the fan to prevent cool air to circulate. This delay can
take up to 5 minutes depending on indoor air temperature.
4. FAN button
Push this button to select the fan speed along this sequence:
Automatic (AUTO), low (
), medium (
), high (
).
NOTES:
• On AUTO speed, the device will choose ideal speed according to room temperature and set
temperature.
• In DRY mode (dehumidification), fan always goes at low speed.
5. SWING button
Press this button to select oscillating angles for the louvres as per following sequence:
• When selecting "
", horizontal louvre will automatically flip upward and downward at a maximum
angle.
• When selecting " ,
,
,
, ", the device blows air at fixed position. Horizontal louvre will stop
to the chosen position.
• Hold the SWING button for 2 seconds to define required oscillating angle. When reached, release the
button.
NOTES:
• " ,
,
" are not available on this unit. When device receives this signal, it will function as per
following position "
".
• When the unit is turned off or when operation mode is changed, the louvre will return to the default
position, either fixed up in cooling mode and fixed down in heating mode.