25
NOTE:
Improper screwing of the screws may cause the troubles shown below.
Air leak
Water condensation, water drop
Air leak from ceiling
• If there is still a gap between the ceiling and the decorative panel after tightening the screws, readjust
the height of the indoor unit, as show below.
Gaps are not allowed
If the raising lever and drain hose are
not affected, you can adjust the height
of indoor unit through the hole on the
panel corner.
• Connect the joints for swing flap motor lead wire (at 2 places) on the panel, as shown below.
At body
At body
At pane
At pane
