Otto Bock Start B2, Инструкция по эксплуатации

Страница: 41 / 44

Feature Threshold value (according to Directive (EU)
No. 1300/2014)
Length [mm]
1)
1200 (plus 50 mm for the feet)
Width [mm]
2)
700 (plus 50 mm on each side for the hands when mov­
ing)
Smallest wheels ["]
1)
approx. 3 or greater (according to the directive, the
smallest wheel must be able to overcome a gap measur­
ing 75 mm horizontally and 50 mm vertically)
Height [mm]
2)
max. 1375 mm (54.1"); including a 1.84 m (72.5") large
male wheelchair user (95th percentile)
Turning radius [mm]
1)
1500
Maximum weight [kg]
1)
200 (for wheelchair and user, including any baggage)
Maximum obstacle height that can be overcome [mm]
1)
50
Ground clearance [mm]
2)
60 (at an upward slope angle of 10°, ground clearance
must measure at least 60 mm under the footrest for
going forward at the end of the slope)
Maximum inclination angle on which the wheelchair will
remain stable [°]
1)
6 (dynamic stability in all directions)
9 (static stability in all directions, also when wheel lock
engaged)
1)
Threshold value is always maintained with this type of wheelchair, see Page 39
2)
Threshold value can be exceeded with some wheelchair versions; please measure or ask the qualified personnel
13.2 Required tools
The following tools are required for adjustments and maintenance work:
•
Allen wrenches in sizes 3, 4, 5, 6
• Ring and open-ended wrenches in sizes 10, 11, 13, 19 and 24
• Socket wrench size 19 mm
• Phillips head screwdriver (size: 2)
• Screwdriver (blade width: 2.5 mm)
• Torque wrench (measurement range 5-50 Nm)
13.3 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
•
Thread diameter M4: 3 Nm
• Thread diameter M5: 5 Nm
• Thread diameter M6: 10 Nm
• Thread diameter M8: 25 Nm
41 Start B2
Appendices