Otto Bock Start B2, Инструкция по эксплуатации

Страница: 11 / 44

NOTICE
Use under incorrect environmental conditions
Damage to product due to corrosion or abrasion
► Do not use the product in salt water.
► Make sure that the wheel bearings are not damaged by sand or other particles.
4.3 Side effects
The following side effects may occur during use of the product:
•
Neck, muscle and joint pain
• Circulatory disorders, risk of pressure sores
Contact a doctor or therapist in case of problems.
4.4 Further information
INFORMATION
Even in the event of compliance with all applicable guidelines and standards, alarm systems (e.g. in department
stores) may respond to your product. Should this happen, remove your product from the area where the alarm
was triggered.
4.5 Nameplate and warning labels
The nameplates are found on the crossbrace.
Label Meaning
A
Manufacturer’s product name
B CE marking
C
Maximum load (see section “Technical data”)
D
Manufacturer information/address
E Serial number
1)
F
Manufacturing date
2)
G
Manufacturer’s article number for the product variant
H WARNING! Read the instructions for use before using the
product. Observe important safety-related information
(e.g. warnings, precautions).
I
Symbol for medical device
J
Serial number (PI)
3),1)
K Global Trade Item Number (DI)
4)
1)
YYYY = year of manufacture; WW = week of manufacture; PP = production site; XXXX = sequential production
number
2)
YYYY = year of manufacture; MM = month of manufacture; DD = day of manufacture
3)
UDI-PI to GS1 standard; UDI = Unique Device Identifier, PI = Product Identifier
4)
UDI-DI to GS1 standard; UDI = Unique Device Identifier, DI = Device Identifier
Label Meaning
(For installation of anchor point on the wheelchair only)
Fixation point/anchor point to attach the wheelchair in vehicles
for transporting persons with reduced mobility
5 Delivery
5.1 Scope of delivery
The scope of delivery includes:
•
Preassembled wheelchair
• Two drive wheels (installed or included)
11 Start B2
Delivery