Otto Bock ParaGolfer, Инструкция по эксплуатации

Страница: 35 / 78

Ottobock | 35
Operation
ParaGolfer
6.1.3 Lower leg length
The lower leg length, i.e. the distance between the seat and
footplate, can be adjusted with a spindle. To turn the spindle
use a size 8 Allen wrench. The spindle head is located at the
front side of the seat frame (see fig. 8).
Turn the spindle clockwise to lower the seat bottom; turn it
counter-clockwise to raise the seat bottom (see fig. 8). Since
the footplate remains in the same position during adjust-
ment, the seat height changes similarly to the distance be-
tween the seat and footplate.
Fig. 8 Turning the spindle
6.1.4 Backrest
WARNING
Risk of injury due to tipping out of the wheelchair.
To
change the seat depth setting you first have to move the
seat from the sitting position into the standing position. If
you make the adjustment while the user is sitting in the
wheelchair, all belts must be fastened first (see sec-
tion 6.3).
WARNING
Risk of injury due to improper attachment of the back-
rest.
To ensure sufficient stability, a minimum clamping
range, identified by a red mark on the backrest tubes,
must be observed when adjusting the backrest. The
clamps must be attached below this range.
CAUTION
Risk of pinching or crushing the fingers.
Do not reach
into the danger zone between the clamp and the seat
when adjusting the backrest.