Otto Bock Kimba, Инструкция по эксплуатации

Страница: 38 / 44

91
7.6.2 Adjusting the leg support angle
1) Loosen the fastening nuts in the slotted holes of the leg support (see fig. 92, no. 1).
2) Align the wide slots of the locking bushings perpendicular to the slotted holes (see fig. 93, no. 1). This allows
the leg support to engage without wear.
3) Slide the locking bushings in the slotted holes evenly on both sides (see fig. 93, see arrow) to set the desired
angle.
4) Tighten the mounting nuts (see fig. 92, no. 1).
92 93
7.6.3 Further settings
The following adjustment tasks are described in more detail in the included instructions for use (user):
•
Adjusting the knee angle
8 Delivery
8.1 Final inspection
• Are all options installed according to the order form?
• Are all screws firmly tightened and all hook-and-loop fasteners firmly fastened?
• Are the legrests/armrests (option) adjusted correctly?
8.2 Handing over the product
WARNING
Lack of instruction
Tipping over, falling of the user due to lack of knowledge
►
Instruct the user or the attendant in the proper use of the product when handing it over.
The following steps must be performed for the safe delivery of the product:
38
Delivery
Kimba