Otto Bock Kimba neo Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 60

background image

105

106

107

8.4.8 Use in vehicles for transporting persons with reduced mobility

WARNING

Improper use in vehicles for transporting persons with reduced mobility

Risk of serious injury when using the product as a seat

►

The product has

not

been approved by the manufacturer for use as a seat in vehicles for transporting persons

with reduced mobility.

►

In vehicles for transporting persons with reduced mobility, only use the seats installed in the vehicle with the
corresponding personal restraint systems.

►

Information on the current status of our measures is available from the qualified personnel.

The product Kimba Inline has not been approved by the manufacturer for use as a seat in a vehicle for transporting
persons with reduced mobility.

8.5 Care

CAUTION

Lack of or improper cleaning

Health hazard due to infections, damage to the product due to user error

►

Clean the product at regular intervals.

►

Do not clean the product with a jet of water or a pressure washer. The penetration of water can cause corro
sion and subsequent malfunctions.

►

Check the driving behaviour of the product after cleaning it.

8.5.1 Detaching/attaching the frame padding for cleaning (Kimba Neo only, option)

The frame padding can be removed for care and maintenance of the product.
1)  Open the hook-and-loop closure on the frame padding.
2)  Remove and clean the frame padding.
3)  Fit the frame padding around the push bar and close the hook-and-loop strap.
4)  Twist the hook-and-loop strap down and push the frame padding over the folding mechanism all the way to the

release handles (see fig. 108).

52

Use

Kimba Neo, Kimba Cross, Kimba Inline

«
...
50
51
52
53
54
...
»

Содержание Kimba neo





























































Отзывы:

Нет отзывов

Похожие инструкции для Kimba neo

Бренд: R for Rabbit Страницы: 8

Бренд: S&T Страницы: 50

Бренд: CYBEX Страницы: 50

Бренд: CYBEX Страницы: 76

Бренд: Hipababy Страницы: 6

Бренд: Chicco Страницы: 86

Culle Carrycots

Бренд: Inglesina Страницы: 88

Бренд: Steelcraft Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды