Otto Bock DynamicArm 12K100N, Инструкция по эксплуатации

Страница: 28 / 32

Power supply unit
Reference number 757L24
Storage (with and without packaging) -25 °C/-13 °F to +85 °C/+185 °F
10% to 95% relative humidity
Transport (with and without packaging) -25 °C/-13 °F to +85 °C/+185 °F
10% to 95% relative humidity
Operation -25 °C/-13 °F to +40 °C/+104 °F
Max. 95% relative humidity, non-condensing
Input voltage 90 V~ to 264 V~
Mains frequency 47 Hz to 63 Hz
13 Appendices
13.1 Symbols Used
Declaration of conformity according to the applicable European directives
Manufacturer
Compliance with the requirements according to "FCC Part 15" (USA)
In some jurisdictions it is not permissible to dispose of these products with unsorted household
waste. Disposal that is not in accordance with the regulations of your country may have a detri­
mental impact on health and the environment. Please observe the instructions of your national
authority pertaining to return and collection.
Compliance with the requirements under the "Radiocommunications Act" (AUS)
Serial number
Non-ionising radiation
13.2 Operating states/error signals
13.2.1 Warnings/error signals
Beep signal Vibration signal Error Required action
1 x long 1 x Critical error
(e.g. a sensor is not opera­
tional)
1 x long 5 x Severe error
(e.g. temperature of the lift­
ing motor too high)
2 x 1 x Malfunction
(e.g. incompatible com­
ponent connected)
Turn the product off and on
again or, with the product
turned on, connect the bat­
tery
charger. Contact
Ottobock Service if the
error
has not been
resolved.
28
Appendices
DynamicArm 12K100N