background image

1 Foreword

INFORMATION

Last update: 2015-03-18

Please read this document carefully before using the product.

Follow the safety instructions to avoid injuries and damage to the product.

Instruct the user in the proper and safe use of the product.

Please keep this document in a safe place.

INFORMATION

You can request this document as a PDF file from the Customer Care Center (CCC) at [email protected] or
from the manufacturer's service department (see inside back cover or back page for addresses).

It is possible to increase the display size of the PDF document.

Initial  adjustments  to  the  product  were  made  according  to  the  order  form.  Nevertheless,  fine  adjustment  may  be
required and settings may have to be made according to the medical conditions or the user's requirements. 
These instructions for use provide the information necessary for adjusting the settings. This work should be closely
coordinated with the user.

Please note the following:

The instructions for use (qualified personnel) are intended only for qualified personnel and remain with them. 

The  operation  of  the  product  and  functionality  of  the  options  are  described  in  the  instructions  for  use  (user).
These instructions for use must be given to the user.

Children and youths must be instructed in the use of the product by you or an attendant using the instructions
for use (user).

The manufacturer recommends checking the product settings regularly in order to assure an optimum fit over
the long term. A review is required every six months for children and youths in particular.

The installation and retrofitting of all optional components are generally described in the service manual.

2 Application

2.1 Intended Use

The wheelchair is intended exclusively for the adaptation of seating shells and other orthopaedic seating systems
for  people  who  are  unable  to  walk  or  have  walking  impediments.  It  can  be  operated  either  by  the  user  or  by  an
attendant.
The product can be used indoors and outdoors. In order to provide an optimised, individual fitting, it is adjustable
and/or adaptable.
The product may only be used with the options which are listed in the product order form.
The Otto Bock warranty applies only when the product is used according to the specified conditions and for the
intended purposes.

2.2 Indications

This wheelchair is suitable for fittings for users in all age groups.
The  use  of  various  orthopaedic  seating  systems  (e.g.  seating  shells)  and  the  variety  of  adjustment  possibilities
make the wheelchair suitable for use in case of inability to walk/walking impediments, e.g. due to:

Paralysis (paraplegia/tetraplegia)

Loss of limbs (leg amputation)

Limb defect/deformity

Joint contractures/defects

Neurological and muscular diseases

2.3 Contraindications

None.

2.4 Required Qualifications

The adjustment tasks described below are necessary for optimum adaptation to the respective seating system, and
may only be completed by qualified, qualified personnel (orthopaedic authorised personnel, specialist dealers for
rehabilitation products).

Ottobock  |  5

discovery tmax

Foreword

Содержание Discovery tmax

































Отзывы: