Otto Bock Discovery tmax, Инструкция по эксплуатации

Страница: 18 / 32

23 24
Centre footrest, footplate
1) Loosen the Allen head screw on the footplate bar (see fig. 25).
2) Adjust the footplate bar to match the user's lower leg length (see fig. 26).
3) Tighten the screws to
6 Nm
.
25 26
6.9.3 Adjusting the Footplate Angle
The footplate setting should be chosen so that the ankle is in a relaxed, comfortable position.
Standard footrest
1) Loosen the Allen head screws on the adapter to adjust the footplate angle (see fig. 27).
2) Set the footplate to the desired angle (see fig. 28).
3) Tighten the Allen head screws to a torque of
8 Nm
.
27 28
Aluminium footrest
1) Loosen the Allen head screw on the pivot bearing of the footplate (see fig. 29; item 1).
2) Turn the mounting in the pivot bearing until the footplate reaches the desired angle (see fig. 29; item 2).
18 | Ottobock
Adjustments
discovery tmax