Otto Bock Avantgarde Teen2 T, Инструкция по эксплуатации

Страница: 20 / 32

6.10 Adjusting the anti-tipper
WARNING
Incorrect installation of the anti-tipper/missing anti-tipper
Tipping over, falling of the user due to failure to observe the installation instructions and because of incorrect
adjustment
► Depending upon the settings of the chassis, the centre of gravity, the back angle and the experience of the
user, the use of an anti-tipper may be necessary.
►
For a small wheelbase and a backrest that is tilted far back, an anti-tipper may need to be installed on both
sides, depending upon the user's experience.
► Verify that the anti-tipper has been installed and adjusted properly. Find the appropriate position with the
assistance of a helper.
Adjusting the length of the pivot arm
1) Remove the Allen head screw on the pivot arm (see fig. 27, item 1).
2) Adjust the length of the pivot arm.
3) Bolt down the pivot arm. The outer edge of the anti-tipper roller has to project beyond the largest diameter of
the tyre (see fig. 28).
Adjusting the angle of the pivot arm
1) Remove the Allen head screw between the anti-tipper tube and the angle adjuster (see fig. 27, item 2).
2) Loosen the second Allen head screw on the angle adjuster (see fig. 27, item 3).
3) Set the angle of the pivot arm.
4) Bolt down the pivot arm. The max. distance between the anti-tipper rollers and floor is
50 mm (see fig. 28).
27
max. 50 mm
28
6.11 Adjusting the lap belt
CAUTION
Incorrect approach to the adjustment process
Injuries, malpositions, user discomfort due to adjustment errors
►
The qualified personnel is responsible for the individual positioning and fitting of the belt system.
► Adjusting the belt system too tightly may lead to unnecessary pain or user discomfort.
► Adjusting the belt system too loosely can cause the user to slide into a dangerous position. In addition, the
fastening snaps could open unintentionally if they slide against hard parts of clothing (e.g. buttons).
CAUTION
Lack of instruction
Injuries, malpositions, illness of the user due to incorrect information
►
The qualified personnel is responsible for making sure that the user and/or attendant/nursing staff has under­
stood the proper adjustment, use, maintenance and care of the belt system.
► In particular, ensure that the user and/or attendant/care staff knows how to quickly loosen and open the
product to avoid delays in case of emergency.
Information on the settings can be found in the manufacturer’s instructions for use accompanying each product.
20
Settings
Avantgarde Teen2 T,
Avantgarde Teen2 VR