Otto Bock 4P862, Инструкция по эксплуатации

Страница: 7 / 80

7
Chargennummer (PPPP YYYY WW)
PPPP - Werk
YYYY - Herstellungsjahr
WW - Herstellungswoche
Medizinprodukt
1 Foreword
English
INFORMATION
Date of last update: 2021-01-13
► Please read this document carefully before using the product and observe the safety
notices.
►
Instruct the user in the safe use of the product.
►
Please contact the manufacturer if you have questions about the product or in case of prob­
lems.
►
Report each serious incident related to the product to the manufacturer and to the relevant
authority in your country. This is particularly important when there is a decline in the health
state.
►
Please keep this document for your records.
The "4P862 C-Leg Guard" will hereon be referred to as the guard/product.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.
2 Product description
2.1 Function
The guard functionally and visually sheaths the C-Leg electronic knee joint. In the covered area,
the guard protects the housing of the knee joint against external influences such as scratching
and surface contamination. The guard is open on the front. The guard is not required for the prop­
er and safe functioning of the joint. To fully sheathe the knee joint, the 4P863=* shield insert has
to be used at the front.
2.2 Combination possibilities
Prosthetic components that are suited for combination with the product are listed below.
Knee Joint Combination Possibilities
Designation Reference number
C-Leg 3C98-3/3C88-3
INFORMATION
The product is not compatible with the charger extension cable – 4X156 ankle, charger exten­
sion cable – 4X157 knee head and charger extension cable – 4X158 ankle long.
3 Intended use
3.1 Indications for use
The product is to be used
solely
for lower limb exoprosthetic fittings.