Otto Bock 1B1-2 Meridium, Инструкция по эксплуатации

Страница: 57 / 776

7.2 Alignment
7.2.1 Settings with the "M-Soft" adjustment software
7.2.1.1 Introduction
The "M-Soft" adjustment software makes it possible to optimise the product settings for a patient. The adjustment
software provides step-by-step guidance through the adjustment process. After the settings are configured, the
data for them can be saved and printed for documentation. These data can be retrieved if required and imported
into the product.
Please consult the integrated online help in the adjustment software for further information.
Updating the M-Soft adjustment software
1) Click "
Help > About
" in the menu bar of the Data Station when you are connected to the Internet.
→
The window opens with the versions of the previously installed programs and the manufacturer's address.
2) Click the "
Check for updates
" button in this window.
→
A search for updates of previously installed software products and components is performed via the Inter­
net.
3) If updates are available, click "
Download
" in the column on the right in order to download and save the
update.
4) Extract the "ZIP file" and execute it.
INFORMATION
Cybersecurity
►
Keep your operating system up to date and always install any available security updates.
► Protect your computer from unauthorised access (e.g., by using virus scans, password protection etc.).
►
Do not use unsecured networks.
► Please contact the manufacturer if you suspect cybersecurity problems.
7.2.1.2 Data transfer between the product and the PC
Product settings using the adjustment software can only be made via Bluetooth data transfer. For this purpose, a
Bluetooth wireless connection must be established between the product and the PC using the "60X5 BionicLink
PC" Bluetooth adapter. The installation and use of the "60X5 BionicLink PC" adapter are described in the instruc­
tions for use supplied with the adapter.
7.2.1.3 Preparing the product to connect to the adjustment software
If the product does not emit any signals when querying the charge level (Display of battery charge level without
additional devices), the battery is drained or the product is switched off.
Switching on the product
1) Connect the power supply and battery charger to the wall socket.
2) Connect the battery charger to the product.
3) Wait for feedback signals.
4) Disconnect the battery charger from the product.
→ After feedback signals are emitted (self-test), the product is switched on.
Switching on Bluetooth
Upon delivery, the Bluetooth function of the prosthesis is switched on.
The Bluetooth function can be switched off using the Cockpit app or the adjustment software. When the Bluetooth
function is switched off, it is only turned on temporarily for 2 minutes after connecting/disconnecting the battery
charger and is then turned off again automatically. When a connection with the PC is active (the
icon is lit
up), the Bluetooth function is not switched off automatically.
7.2.2 Bench alignment in alignment apparatus
With correct bench alignment, e.g. in the PROS.A. assembly alignment apparatus (743A200), the benefits of the
product are realised to best advantage. If the L.A.S.A.R. assembly alignment apparatus (743L200) is available, it
can be used as well.
Alignment can also be carried out using LaserLine/plumb line.
The following points must be observed during alignment:
•
The alignment recommendations provided must be observed in order for the prosthetic foot to function cor­
rectly.
57 1B1-2=* Meridium
Preparing the product for use