Otto Bock 17K29 4, Инструкция по эксплуатации

Страница: 14 / 108

► Fully extend the orthotic joint to activate the lock. Check whether the
lock is engaged.
► Only deactivate the lock when you are able to control the flexion of the
orthotic joint.
CAUTION
Excessive strain due to use on more than one patient
Risk of injury and loss of functionality as well as damage to the product
►
Use the product on only one patient.
►
Observe the maintenance recommendations.
NOTICE
Thermal overloading of the product
Damage due to improper thermal treatment
► Do not carry out any heat treatment at temperatures above
300 °C
(570 °F) .
► Prior to thermal treatment, remove all temperature-critical components
(such as plastic parts).
NOTICE
Use under unallowable environmental conditions
Damage to product due to unallowable environmental conditions
► Do not expose the product to unallowable environmental conditions.
► If the product has been exposed to unallowable environmental condi­
tions, check it for damage.
►
If damage is apparent or in case of doubt, do not continue using the
product.
► Take suitable measures if required (e.g. cleaning, repair, replacement,
inspection by the manufacturer or a specialist workshop, etc.).
5 Preparing the product for use
CAUTION
Repeated bending at the same position
Risk of injury due to breakage of the bar, change in or loss of functionality
► Avoid repeated bending at the same position.
14