10 | Ottobock
2.4 Function
All work tools are povided with standard stud.
The 10V15 Standard Connector is required for the connection to the 10V8
Wrist Units.
The 11S33=* Quick-disconnect Wrist Adapter with Standard Connector
is required for adapting to the Ottobock System Wrist Unit. The 11S33=*
Wrist Adapter with Standard Connector is available with sizes of ø 40 mm /
ø 44 mm and ø 48 mm.
Turn the connector (Fig. 1) to lock the work tool in place by rotationally-
stable connection.
3 Disposal
In some jurisdictions it is not permissible to dispose of the product with
unsorted household waste. Improper disposal can be harmful to health and
the environment. Observe the information provided by the responsible autho-
rities in your country regarding return, collection and disposal procedures.
4 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
4.1 Liability
The manufacturer will only assume liability if the product is used in accor-
dance with the descriptions and instructions provided in this document.
The manufacturer will not assume liability for damage caused by disregard
of this document, particularly due to improper use or unauthorised modi-
fication of the product.
4.2
CE conformity
The product meets the requirements of Regulation (EU) 2017/745on medical
devices. The CE declaration of conformity can be downloaded from the manu-
facturer’s website.
