OTT FREEZER MASTERCHEF, Инструкция по эксплуатации

Страница: 21 / 37

MASTERCHEF
- 21 - masterchef_G - 07/07 - ed. 2
3.3.8 "GO" push-button
When you press GO push-button the temperature of TEC is displayed for 5 seconds in place of
TEV
in all functions apart from STOP.
When you hold it down you access User Programming (see relative paragraph).
3.3.9 Increment push-button
With this pushbutton you can increase the temperature Set, when enabled (relative LED ON), for
example during heating or cooling or to increase beater speed.
In Programming it is used to increase the value of programming step.
See paragraph PRINT EVENTS.
3.3.10 Decrement push-button
With this pushbutton you can decrease the temperature Set, when enabled (relative LED ON), for
example during heating or cooling or to decrease beater speed.
In Programming it is used to decrease the value of programming step.
This key is also used to read events.
The machine has a wide memory which helps us recording most events (such as the function
selected, alarms and so on).
In order to read events in memory, it is necessary to have the machine in STOP position, and press
the Decrement key.
The newest event will be displayed, as well as its date and time.
All events can be scrolled through Increment and Decrement keys.
In the Events all operations executed will be displayed starting from the last one (from the newest
to the oldest).On top, the display shows the functions and down date time and TEV.
To leave EVENTS mode press STOP or just wait for 15".
The events list let us understand when and how often an alarm occurred.
Further we can have information about the pasteurization program by checking all its steps and
relevant times.
3.3.11 Timer push-button
In manual function the timer button is used to set a time that is only connected to beep.
In Ice cream production recipe however, see timer connected to HOT.
In a manual function, when you press the button, the display shows:
14:15:08
TUE
set0:30 0:29:59
The total set time may be changed using Increase and Decrease from 1 to 59 minutes, if you continue
to increase the value the hours increase (the minutes can no longer be changed) up to a maximum
of 9 hours while on the right the time appears that decreases.
Once the time has ended a sound alarm sounds.
During Timer count you can read
TEC temperature by pressing GO and TEV temperature by
pressing REC .
When an automatic program is run where we have for example heating at 85°C followed by
thermostat control for 5 minutes, in timer count (5’) the display becomes:
set +85° +85°
set0:05 0:02:34
At top left the thermostat controlled temperature appears, at top right the current TEV temperature,
bottom left set of time set and bottom right the time which decreases.