Heating ON
Heating OFF (energy saving mode)
Control output for connecting a nystagmograph (graphical recorder as to DIN 30600, IEC 417 5192)
Equipotentiality DIN 30600 495, ISO 417 5021
Connection for waste water
Connection for water
Low
Reduced flow rate for stimulation of the vestibule
High
High flow rate for rinsing the auditory canal
2
Safety advice
•
The Aquamatic™ II unit is produced according to IEC 601/EN 60601 and listed in the following classes:
–
VDE Class of protection 1
–
Class IIa (EEC 93/42).
•
The equipment must only be connected to a power outlet with a correctly installed ground/earthing contact accord-
ing to local and state regulations.
•
The unit must be installed by a specialist authorized by GN Otometrics (see
).
•
The Aquamatic™ II may be used in
supervised operation
by qualified personnel which have been authorized by GN
Otometrics and which have been trained in the operation of the equipment (IEC 601-1/EN 60601-1).
•
The mains voltage specified on the type plate must match the power supply system.
•
Prior to every use of the equipment, verify that the device is technically safe and in proper working condition.
Damaged leads
must be replaced immediately!
•
Correct configuration in assembly of country-specific connections
green/yellow
protective conductor (PE)
blue
neutral conductor (N)
black resp. brown
phase (L)
•
The control panel must be visible and in reach of the operator. Ensure the equipment is stable prior to use.
•
In the thermal process for reducing bacterial count hot water is being ducted through the irrigation handle. Please do
not
take the handle from its holder or spray water!
•
Metal parts can be hot!
•
Prior to spraying, the water temperature must be checked by the user!
Otometrics - Aquamatic II
7
2 Safety advice
