manualshive.com logo in svg

Otodynamics DP Clinical, Руководство пользователя

Поделиться
Скачать
Otodynamics DP Clinical Скачать руководство пользователя страница 217

Otoport OAE+ABR

User Manual for Otoport DP+TE model

217

Technical specifications

27.4

  EN60645-3 conformance notes

These notes are provided in compliance with EN60645-3 “Electroacoustics 

audiometric equipment - Part 3: test signals of short duration.”
(a)  Types of short duration stimuli:
 

The Otoport TEOAE test uses short duration stimuli. During test setup a 

‘rectangular stimulus’ is used. During data collection a ‘bipolar stimulus’ is used. 

The rectangular is a unipolar pulse of 78uS length. The bipolar stimulus is 1 

cycle of a triangle waveform of 240uS period. Both stimuli are low pass filtered 

by a 10kHz anti-alias filter, which ‘rounds’ any ‘sharp edges’.

(b) Transducers and headband force:

 

The stimulus is delivered to the patient’s ear using a UGS or UGD Otodynamics 

probe. The probe tip holds the probe ear piece in the ear canal, with no 

headband or other retaining device required.

(c)  Sound field system:
 

The sound field is generated by the probe sealed in the ear canal by its tip.

(d & e) Calibration cavity and measurement type:
 

For the purposes of EN60645-3 calibration was performed in an occluded ear 

canal simulator conforming to IEC 60711 (Bruel and Kjear type 4157). The probe 

was mounted in a DB2012 adaptor using an Otodynamics probe tip. The sound 

ports of the probe were aligned with the 4157 reference plane. A UGD probe 

was used for the calibration. Sound levels from the 4157 ear simulator were 

measured in dB SPL peak-to-peak equivalent, as defined in EN60645-3.

(f)   Signal levels:

 

The following conversion factors convert between the stimulus level reported on 

the Otoport screen and the signal level in the IEC 60711 occluded ear simulator:

     

rectangular stimulus: -6.1dB

      

bipolar stimulus: -7.1dB

 

The following conversion factors convert between the signal level generated 

in the ear simulator by the Otoport stimulus and the level that would be 

generated by a ‘reference stimulus’ of the same peak to peak electrical drive. 

(The ‘reference stimulus is a 100uS unipolar rectangular pulse, as defined in 

EN60645-3.):

      

rectangular stimulus: +3.0dB

      

bipolar stimulus: +2.4dB

Содержание DP Clinical





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды