background image

 

 

2

 

Page 

ACKNOWLEDGEMENTS 

 

The following people have generously provided information to me: 
 
Stephen Showers 
Corporate Archivist 
Otis Elevator Company 
Five Farm Springs Road 
Farmington, CT 06032 
860-676-5577 

[email protected]

 

 
Mark Eyestone 
Westcoaster Info Center 
2306 Crystal Way 
Crystal Lake, IL 60012-2221 
815-455-2179 

[email protected]

 

 
 

 

AUTHOR’S NOTE 

 
This manual was written without the knowledge, consent, or participation of the Otis 
Elevator Company, and it does NOT have their endorsement. This manual is my own 
work on my own  initiative and the responsibility for its content is mine alone. 

 

No official Otis S-71 technical or maintenance manual has been located. Except for the 
sales brochure excerpt on page 3, the text, drawings, and photographs in this document 
are my own work  from my own reverse engineering done on my own S-71, and 
comparison with other S-71’s available for inspection. Despite 40-odd years of 
electronics engineering, technician work, technical writing, and “jack of all trades” it is 
still possible for me to err. I reserve the right to update and correct this document as new 
information becomes available. Comments, suggestions, and corrections are welcomed. 
 
 

© 2005 by Jim Kaness 

 

Jim Kaness 

4267 Varsity Street 

Ventura, CA 93003-3803 

805-644-3237 

[email protected]

  

 

Содержание S-71


















Отзывы: