Declaration of Conformity
Model No.:
PV-690S
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1.
This device may not cause harmful interference
2.
This device must accept any interference received, including interference that may
cause undesired operation.
Copyright Notice
All rights reserved. No part of these written materials or software may be reproduced or used in any form or
by any means, electronic or mechanical, including photocopying and recording and the use of any kind of
information storage and retrieval system, without prior permission in writing from our company. No liability is
assumed with respect to the use of the information contained in these written materials or software, or for
damages resulting from the use of the information contained in these written materials or of the software. Our
company reserves the right to alter the features and contents of this publication or software without obligation
or advance notice.
Precautions
General Precautions
Do not open or modify
Do not disassemble the device, as it may cause damage to the unit. For internal repairs, consult
your dealer or an Authorized Service Centre.
Protect from humidity
1.
The device is not water-resistant. Do not put it in water and be careful to protect it from rain,
sea water, etc.
2.
If liquid or some foreign object has entered the unit, do not use it, but consult your dealer or
and Authorized Service Centre. Do not touch the internal parts. These are high tension circuits
that may cause sever electric shock.
To avoid damage or mis-operation of the device, only use it where the humidity is 30 ~ 90%.
Protect from high temperatures
1.
Do not leave the device in a closed car, etc., in the sun, as temperature may rise and cause
damage.
2.
To avoid damage or mis-operation of the device, only use it where the temperature is 0 ~ 40
degree.
3.
Do not bring the device suddenly from a hot to a cold place, or vice versa. This may cause the
formation of condensation inside the unit that may damage it. To prevent the formation of
condensation, put the device in a plastic bag, etc., to protect it and wait until the device has
reached the ambient temperature before taking it out.
If used under low temperature conditions, the batteries will have a shorter life than normal.
Last Update: 20-Jul-06
4
