Battery charger for the PUMA T2 hand-held radio
Technical Manual
General information and safety recommendations
P/N: 779-0357/02
Revision 04
OTE Proprietary Information
Page 5
1.3.1
BCP2-850 and BCP6-850 models
The BCP2-850 and BCP6-850 battery charger models are suitable for charging
NiCd and NiMH batteries.
They are supplied by the power supply network voltage (230 V) through a proper
cable.
The BCP2-850 model has a couple of charging slots and thus it can charge two
batteries at a time.
The BCP6-850 model has three couples of charging slots and thus it can charge
six batteries at a time. Each couple of slots has its own light signalling panel which
gives information on the upper slot (upper side) and on the lower slot (lower side).
The discharging button (S1) works if the battery is inserted into the BCP2-850
upper slot as well as the other discharging buttons (S1, S2, S3) work if the
batteries are inserted into the three BCP6-850 upper slots.
The BCP6-850 model can be thought as if made up of three BCP2-850 models.
The six slot BCP6-850 battery charger is shown in fig. 1.3.
Fig. 1.3:
BCP6-850 battery charger
