Battery charger for the PUMA T2 hand-held radio
Technical Manual
Troubleshooting
P/N: 779-0357/02
Rev. 02, December 2002
Marconi Proprietary information
Page 43
6.
TROUBLESHOOTING
The PUMA T2 battery charger troubleshooting techniques are described in this
section.
The information given in this manual takes into consideration the fact that all the III
level maintenance operations will be done only by OTE assistance technicians.
6.1
FLOW DIAGRAMS
The troubleshooting flow diagrams are gathered in this chapter. These diagrams
are meant only for maintenance technical personnel.
By starting from a bad functioning symptom we arrive to the corrective operation to
be carried out in order to remove the failure.
A summary of the battery charger troubleshooting is shown in fig. 6.1.
In particular:
N:
stands for the procedure position in the prospectus;
Description:
stands for the symptom and thus the beginning of the fault seeking
procedure;
Fig. Ref.:
stands for the figure containing the flow chart relating to the
appropriate procedure.
Tab. 6.1:
Battery charger troubleshooting
N
Description
Fig. Ref.
1
The battery charger shows no power voltage presence
6.1
2
The battery charger doesn’t charge the battery correctly even
though it shows the correct light signalling
6.2
