No. P30051
―14―
7. TRANSPORT AND INSTALLATION
7.1 Transport
WARNING
Follow the instructions below to avoid trouble and product damage when carrying the welding
machine.
٨
Do not touch the live electrical parts inside or outside the welding machine.
٨
Be sure to disconnect the line disconnect switch when carrying the welding
machine.
٨
When carrying the welding power source by a crane, do not use the handle and
hang the welding power source with the eyebolt surely.
٨
Do not hang welding power source without eyebolt by a crane.
7.2 Installation
WARNING
When installing the welding machine, follow the instructions below to avoid a fire caused by
welding or physical injury from gas fumes.
٨
Do not place the welding machine near combustible materials or flammable
gas.
٨
Remove combustible materials to prevent dross coming into contact with
combustible objects. If that not possible, cover them with noncombustible
covers.
٨
To avoid gas poisoning and danger of suffocation, wear a gas mask or
adequately ventilate when the welding machine is used in the place regulated
by a local law.
٨
To prevent injury or poisoning caused by fume, wear a gas mask or weld at a
partial exhaust facility approved by the local regulation.
٨
Adequately ventilate or wear a gas mask when using the welding machine in a
tank, boiler, or the hold of a ship. Heavier gases such as carbon dioxide or
argon gases tend to collect there.
٨
When using the welding machine at a narrow space, comply with a trained
supervisor’s directions. And be sure to wear a gas mask.
٨
Do not operate the welding machine near the place where degreasing,
cleansing, or spraying is performed. Otherwise, poisonous gas may be
generated.
٨
Be sure to wear a gas mask or adequately ventilate when welding a coating
steel plate. (Poisonous gas and fume may be generated.)
