WiJET.Video Technical Manual
Page 3 of 29
Chapter 2:
WiJET.Video SYSTEM INSTALLATION
2.1 Safety Statements
Use only the power adapter provided with this product or the manufacturer's authorized
replacement power supply.
Connect the power adapter to a properly grounded electrical outlet that is near the
product and easily accessible.
Refer service or repairs, other than those described in the user documentation, to a
professional service person.
2.2 Hardware Installation
2.2.1 Power
Power is supplied to the WiJET.Video via a 1.7 amps 5volt DC power adapter.
Warning: use only the power supply adapter provided with this product or the
manufacturer’s authorized replacement power supply.
2.2.2 VGA Connection
This is
a standard 15 pin female VGA connector where you will connect the WiJET.Video
to either a monitor or a projector via a straight-thru monitor cable (either purchased
separately or with the one that comes with the projector or mon
itor).
2.2.3 Video Output Signal Connections
WiJET.Video provides an S-Video connection. Regular S-Video cable can be used to
connect with an S-Video input on a TV or projector. Special cables may be ordered to
connect to composite video or component video inputs.
2.2.4 Status LED’s
There are two status LED’s on the WiJET.Video. From the front of the unit, the LED on
the left is the power indicator while the LED on the right is the link status and video out
indicator. During boot-up, the link status LED will initially remain unlit. When the link
LED blinks red, it means the WiJET-G is ready for connection to a PC. Upon
connection from a computer, the LED will turn solid green. Upon disconnection, the
LED will revert to blinking red again.
2.2.5 Reset to Factory Default
WiJET.Video provides a pin-push button to the side of the unit. Press this button for a
second to reset the WiJET.Video back to the factory default setting. The unit will
reboot.
Normally, this should only be done when you forget the Web password or when the
WEP keys have become incompatible with the wireless card on your PC.
