OTARI MX-5050MKIII-2, Руководство по эксплуатации

Страница: 27 / 48

Then slowly withdraw the demagnetizer as shown in Figure 5-2.
Repeat step 5 for each head stack. 6 .
7. Repeat the procedure in step 5 for each guide and other metal­
lic parts in the tape path.
8. Move the demagnetizer slowly away from the transport at least
three feeds, and then disconnect the power from the d e ­
magnetizer .
5.1.3 LUBRICATION
The only component requiring lubrication is the capstan.
Lubricate the capstan every six months, or after each 1,000 h r s .
W of operation (whichever occurs first), or as required using the
recommended lubricating oil (Table 4-1). For lubrication, pro­
ceed as follows, referring to Fig. 5-3:
CAUTION
1. DO NOT USE ANY OIL EXCEPT ANDEROL OTARI LUBRICATING
OIL PZ9E003 FOR LUBRICATION.
2. BE CERTAIN TO CLEAN THE CAPSTAN SHAFT THOROUGHLY.
LUBRICATING OIL COULD RUIN THE CAPSTAN PINCH ROLLER
AND MAGNETIC TAPE.
CLEAN THE CAPSTAN WITH ISOPROPYL ALCOHOL AFTER
LUBRICATION.
1. Remove the pinch roller cap by turning the cross-head screw
counterclockwise.
5-3