OTARI MX-5050MKIII-2, Руководство по эксплуатации

Страница: 10 / 48

Outputs: Line
Headphone
Level: +4 dBm or -10 dBm, rear panel
switch selectable.
Active balanced (Floating t y p e ) ,
Source impedance: 5 ohms.
Load impedance: More than 600 ohms.
Maximum line output: +27 dBm with a
600 ohm load.
Level: -24 dBm with an 8 ohm load.
Load impedance: 8 ohms or greater.
Equalization NAB or IEC for 3-3/4, 7-1/2, and
15 ips.
Switchable on the rear panel, but
calibration is necessary.
Frequency Response
15 ips : 30 Hz to 20 kHz ± 2 dB
7-1/2 ips: 20 Hz to 18 kHz + 2 dB
3-3/4 ips: 20 Hz to 10 kHz
±
2 dB
Specifications refer to a 1 kHz refer­
ence when recorded on 3M 226.
Signal to Noise Ratio
Over-all measured at the level of 520
n W b / m .
NAB Equalization:
Tape Speed Weighted Unweighted
15 ips 6 6 dB 64 dB
7-1/2 ips 6 8 dB
6 8 dB
3-3/4 ips 66 dB
64 dB
IEC Equalization:
Tape Speed
Weighted
Unweighted
15 ips 6 7 dB 65 dB
7-1/2 ips 66 dB 64 dB
3-3/4 ips 66 dB
64 dB
1-7