Otai Pluto Fisheye, Руководство пользователя

Страница: 27 / 89

always innovative
Wireless
Basic Setting
Wireless Mode
These parameter is used to dene the operating mode of the Wireless LAN interface.
You can select among the following modes:
Modes
Description
AP
Client
Standard AP mode or MASTER mode.
Client mode, available as IEEE 802.11 standards. Should be used in conjunction with
WAN port. One the unit is set to client mode then the WIRELESS become WAN and
the IP for this port needs to be set at WAN section in Basic Setting. Is useful if the unit
is a client and all trafc coming from the wireless needs to be masqueraded. So use this
if Internet comes to the Unit from Wireless side and all LAN trafc needs to access the
internet but also remain behind the rewall.
Client-Bridge
This is client mode but in bridged form. This is useful in some scenarios but it only forwards
its MAC address for the whole network behind the LAN. So some devices which need their
MAC address also forwarded, may not work. Its used mostly in scenarios like BTS-CPE and
CPE has not many computers attached and CPE to CPE communications is required.
Adhoc
This is used for creating MESH network where no one is master and no one is slave and every
one connects to every one and routing is done by OLSR.
WDS Station
This is the most recommended for use in PTP and PTMP scenarios (CPE-CPE communication
over the BTS is not possible in this mode). This is to be used with WDS AP at the central site.
It offers the most transparent bridging.