manualshive.com logo in svg

Otai Pluto Fisheye, Руководство пользователя

Поделиться
Скачать
Otai Pluto Fisheye Скачать руководство пользователя страница 28

Modes

Description

Full (20MHz)

Regular 20Mhz channel, full bandwidth available

Half (10MHz)

10Mhz channel, oc-5Mhz, ½ the bandwidth available on full. Helps in concentrating 
the signal and also interference from adjacent links reduced by half.

Quarter (5MHz)

5Mhz channel, oc-2.5mhz, ¼ the bandwidth available on full. Helps in concentrating 
the signal further and interference from adjacent links reduced by 1/4th.

always innovative

Wireless

Basic Setting

Wireless Network Mode

Denes the IEEE802.11 networking mode.

Option of multiple modes.

Modes

Description

Disabled

Mixed

BG-Mixed

A-Only

B-Only

G-Only

N-Only

If selected, it will disable the interface.

Mixed 802.11a / 802.11b / 802.11g / 802.11n (depending on radio capabilities) Mixed mode 

BG-Mixed Operating in 2,4 GHz 802.11b & 802.11g mixed mode - 802.11a / 802.11n 
(devices cannot connect) 

A-Only Operating in 5 GHz, 802.11b / 802.11g / 802.11n devices cannot connect 

B-Only Operating in 2,4 GHz, 802.11b – 802.11a / 802.11g / 802.11n devices cannot connect 

G-Only Operating in 2,4 GHz, 802.11g – 802.11b / 802.11g / 802.11n devices cannot connect

N-Only Operating in 2,4 / 5GHz (depending on radio capabilities), 802.11n – 802.11a / 
802.11b / 802.11g devices cannot connect 

Pre-Wimax feature. Allows user to set spectrum utilization. Dynamic 20/40 MHZ Channel width switch between 20 MHz & 
40 MHz ,Helps in increasing the bandwidth and reducing interference.

Channel Width

Содержание Pluto Fisheye


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды