Osterizer 6650, Инструкция по эксплуатации

Страница: 7 / 44

7
H
OW
T
O
U
SE
Y
OUR
B
LENDER
3-Speed
The 3 speeds are Stir, Blend and Liquefy.
FOR CONTINUOUS OPERATION
All speed buttons are continuous speed buttons except for the Pulse button which is a controlled
cycle button.
Press "ON" button to turn the blender on. A flashing red light indicates the blender is turned on.
Rest hand on top of container and then push desired "speed" button. Once the desired speed
is selected, it will turn red to indicate your selection. Press "OFF" to turn blender off.
The blender is off when there is no red light showing.
FOR CONTROLLED CYCLE OPERATIONS
Pulse Button Function
Press "ON" button to turn the blender on. A flashing red light will indicate the unit is turned on.
Rest hand on top of container and then push button labeled "PULSE". Once the "PULSE" button
is pushed, it will turn red to indicate your selection. Hold button down for about 2 seconds,
then release and allow blades to coast to a stop. The "PULSE" button is always at maximum speed.
Repeat cycle until contents reach desired consistency. Press "OFF" to turn blender off.
The blender is off when there is no red light showing.
5-Speed
The 5 speeds are Stir, Chop, Blend, Grind and Liquefy.
FOR CONTINUOUS OPERATION
All speed buttons are continuous speed buttons except for the Pulse and Auto Pulse buttons
which are controlled cycle buttons.
Press "ON" button to turn the blender on, a flashing red light indicates the blender is turned on.
Rest hand on top of container and then push desired "speed" button. Once the desired speed
is selected, it will turn red to indicate your selection. Press "OFF" to turn blender off.
The blender is off when there is no red light showing.
FOR CONTROLLED CYCLE OPERATIONS
Pulse and Auto Pulse buttons are controlled cycle buttons.
Pulse Button Function
Press "ON" button to turn the blender on. A flashing red light will indicate the unit is turned on.
Rest hand on top of container and then push button labeled "PULSE". Once the "PULSE" button
is pushed, it will turn red to indicate your selection. Hold button down for about 2 seconds,
then release and allow blades to coast to a stop. The "PULSE" button is always at maximum speed.
Repeat cycle until contents reach desired consistency. Press "OFF" to turn blender off.
The blender is off when there is no red light showing.
NOTE: Pulse button can be held longer than 2 seconds if needed.