Osterizer 6650, Инструкция по эксплуатации

Страница: 6 / 44

6
M
INI
-B
LEND
® J
ARS
Mini-Blend ® Jars 8 ounce (250 m) or 30 ounce (950 ml) sizes are available as an accessory,
and are not normally included with your blender. For proper assembly and tightening instructions,
see directions above and on previous page. The Mini-Blend
® Jars allow for the processing and
storing of foods in the same container.
DO NOT USE OTHER TYPES OF JARS FOR PROCESSING FOODS. Ordinary jars may break
or unscrew during processing. Do not wash any parts, including container, in an automatic
dishwasher.
DO NOT fill Mini-Blend ® Jar above MAXIMUM FILL LINE to allow for expansion
of foods while processing. Overfilling may cause the jar to break and could result in injury.
M
ILKSHAKE
B
LADE
The milkshake blade is also available as an accessory, and is not normally included with your
blender. For proper assembly and tightening instructions, see directions above and on previous
page. The milkshake blade is designed to make thick, rich milk shakes consisting primarily
of ice cream and milk. Soft fruit and crumbled cookies can also be added to shakes when using
the milkshake blade. Hard candies, nuts, and other hard foods should not be added to shakes
when using the milkshake blade.
USE THE MILKSHAKE BLADE ON THE HIGHEST SPEED
SETTING ONLY. DO NOT WASH ANY PARTS, INCLUDING THE MILKSHAKE BLADE IN
AN AUTOMATIC DISH WASHER.
H
OW
Y
OUR
O
STERIZER
® B
LENDER
W
ORKS
Your Osterizer ® blender is a multi-speed appliance which operates on a wide range of speeds from
very slow to very fast. This range of speeds makes food preparation easy, interesting and also saves
time because your Osterizer
® blender processes foods in seconds.
In addition, your Osterizer ® blender has 2 distinct methods of operation; CONTINUOUS run for
blending, liquefying and fine chopping and CONTROLLED CYCLE BLENDING , used for coarse
chopping pieces of food, such as chopped vegetables, nuts or cheeses. There are several different
ways of operating the
CONTROLLED CYCLE BLENDING feature but all involve turning the motor
"on" and "off" intermittently. During the "on" portion of the cycle, food is chopped and tossed away
from the blades. During the "off" portion of the cycle, the food is distributed around the blades to
make processing more uniform.
IN THIS BOOK, THE CONTROLLED CYCLE BLENDING
FEATURE IS REFERRED TO AS A CYCLE.
NOTE: A cycle consists of operating the blender for about 2 seconds and then
allowing the blade to coast to a stop.