![background image](http://html.mh-extra.com/html/oster/gcstcc3000/gcstcc3000_instruction-manual_1657490020.webp)
Type of Debris/Build-Up
Cleaning Recommendation
Light Dirt
Use a cotton cloth or terrycloth towel to wipe the
soleplate with warm soapy water.
Hard Water Deposits
Use a cotton cloth or terrycloth towel to wipe the
soleplate with a 50/50 vinegar/water mixture.
Heavy Starch or Residue
Build-up
Use Hot Iron Cleaner or Mr. Clean
®
Magic Eraser
®
cleaning pad. Refer to the manufacturer’s directions
included with these products for specific cleaner usage
instructions.
Mr. Clean
®
and Magic Eraser
®
are registered
trademarks owned by the Procter & Gamble company.
English - 8
Anti-Calcium System
Ironing Tips
Anti-calcium is a permanent system located inside the water reservoir to eliminate
impurities.
TO PROLONG EFFICIENCY, FOLLOW THESE STEPS ONCE A MONTH OR AFTER
EVERY 30 USES:
1. Turn off iron.
2. Add 1 teaspoon of salt to ¾ cup water and fill water reservoir with this solution.
3. Leave solution in water reservoir for 15 minutes, shake occasionally, and then empty
through the water fill hole or through the “self-clean method”.
4. Fill water reservoir again with salt water solution, shake and empty after 15 minutes.
5. Fill water reservoir with fresh water to rinse and empty.
For more ironing tips and hints, please visit oster.com
• Before ironing, check the garment label and follow manufacturer’s instructions. If no
instructions, start with a low-heat setting and test by ironing a small area, and gradually
increase heat.
• Sort garments by fabric type. Iron articles requiring a low-temperature setting and
gradually work up the temperature range.
• When changing from a high-temperature setting to a lower one, allow 5 minutes for
change to allow the iron to heat up or cool down.
• When steam ironing, use long, slow passes over the fabric to allow the steam to penetrate
the fabric and the heat of the soleplate to dry the moisture.
• Iron linen garments inside out to prevent shine. An ironing cloth or cotton fabric can be
used to reduce shine.
• Iron cotton while the fabric is still damp, or pre-moisten it with a spray bottle. Set the
temperature to a high setting and use steam for stubborn wrinkles and creases
• Iron denim on the highest heat setting and use steam. Use starch for crisp, neatly creased
fabric.
• Ensure zippers are closed and flap is flat. Iron over the flap, holding the garment taut.
• Spray starch makes the job easier.
Содержание GCSTCC3000
Страница 12: ...Español 11 NOTA ...