www.oster.com
www.oster.com
11
12
PROBLEMS AND SOLUTIONS
PROBLEM
SOLUTION
Juice Extractor will not work
after switching on “I”
• Safety locking arms may
not be locked properly in its
position
• Turn off and unplug unit
and ensure all parts are
assembled properly
• Turn off and unplug unit and
check if there are any residues
blocking the unit
Motor makes loud noise and
unit starts vibrating
• Turn off and unplug unit
and ensure all parts are
assembled properly
• Juicing overripe fruits may
produce too much pulp and
clog the filter. Turn off and
unplug unit and clean the
filter thoroughly
Motor appears to stall when
juicing
• If pulp starts building up
under the lid, slow down the
juicing process. Turn off and
unplug unit and clean the
filter basket, the stainless
steel filter and the lid
Too much pulp build up on
stainless steel filter
• Follow the instructions to
disassemble the unit included
in the “After Using Your Juice
Extractor” section. Clean up
pulp from the filter
Pulp too wet and reduced
juice extraction
• Try a slower juicing action
by pushing the food Pusher
down slower. Remove
stainless steel mesh filter and
thoroughly clean mesh with
a nylon brush. Rinse the filter
basket with hot water. If the
fine mesh holes are blocked,
soak the basket in a solution
of hot water with 10% lemon
juice to unblock the holes or
wash in the dishwasher. This
will remove excess fiber build
up (from fruit or vegetables),
which could be reducing the
flow of juice
Juice leaks between the rim
of the Juicer and Cover
the Filter.
• Try a slower juicing action
by pushing the Food Pusher
down slower
PROBLEMS AND SOLUTIONS
3157 series_13ESM1.indd 11-12
9/27/13 3:04 PM