Össur Power Knee, Инструкция по эксплуатации

Страница: 13 / 19

13 12
MAINTENANCE
DAILY MAINTENANCE
There are no user-serviceable components in the POWER KNEE. Just make sure that it remains in good outward
condition. Clean the surface of the prosthesis with a soft damp cloth regularly and if necessary with a mild
disinfectant.
The battery charger and power supply are maintenance-free. Make sure that they remain in good outward condition
and clean their surface with a soft damp cloth regularly.
SCHEDULED MAINTENANCE
Thorough visual inspection of the prosthesis is required every six months. See the POWER KNEE Warranty Card
with regard to the maintenance of your motorized prosthesis.
STORAGE & TRANSPORT CONDITIONS
Prosthesis and accessories should be stored and transported at temperatures between 0°C and +45°C at a
humidity level of 10% to 90% RH, non-condensing, and atmospheric pressure of 700 hPa to 1060 hPa.
To extend battery life, avoid storing batteries at full charge for extended periods of time.
Handle with care. Do not transport in harsh or marine environments.
PARTS ORDERING
Contact your Össur representative to order any replacement items (including the battery charger and power
supply).
WARRANTY
For warranty information, see the POWER KNEE Warranty Card.
DISPOSAL OF EQUIPMENT
Dispose of the POWER KNEE accessories in an environmentally responsible manner. Never incinerate a battery as
it may explode. Contact your Össur representative for further information.
PRODUCT CERTIFICATION INFORMATION
The POWER KNEE system has been tested by an independent, accredited laboratory and found to comply with the
IEC 60601-1 standard (Medical Electrical Equipment – Part 1: General Requirements for Basic Safety and Essential
Performance) and its collateral standard IEC 60601-1-2 (Medical Electrical Equipment - Part 1-2: General
Requirements for Basic Safety and Essential Performance - Collateral Standard: Electromagnetic Compatibility -
Requirements and Tests) and national deviations. The equipment complies with the MDD 93/42/EEC European
directive and ISO 10328 standard. The POWER KNEE system carries the CE mark. The POWER KNEE meets IEC
type BF leakage current requirements (
). The Össur hf. company fulfills the requirements of ISO 13485.
LIABILITY
The manufacturer recommends using the device only under the specified conditions and for the intended
purposes. The device must be maintained according to the instructions for use. The manufacturer is not liable for
damage caused by component combinations that were not authorized by the manufacturer.