Potentiostat
User Manual
Ossila.com
16
Ossila Limited © 2020
Figure 9.6.
Readout of the potential and current at the mouse cursor location.
(II)
Graph Display Controls
By default, the graph will automatically scale the axes of the graph to display all the data within it.
The view can be controlled manually using the following mouse controls:
•
Left/Middle click and drag
–
pan the axes.
•
Right click and drag
–
scale the axes.
•
Scroll wheel
–
scale the axes.
A specific axis can be controlled by using these controls on the axis labels. The axes can be reset
by clicking the ‘A’ button in the bottom
-left of the graph, as shown in
Figure 9.7.
Button to reset the graph axes.
(III)
Selecting and Removing Curves
When there are multiple curves on the graph, one of them is considered the active curve. This
curve will be displayed in blue, whilst the other curves will be grey. By default, the last curve to be
measured is the active curve. You can change which curve is the active curve by clicking on any
curve using the left mouse button.
